Thursday, June 21, 2012

Walkin Interview @ Infotech Enterprises in Bangalore & Pune on 23rd and 24th June 2012

Company : Infotech Enterprises Ltd (www.infotech-enetrprises.com)

Walk-in interviews at Bangalore and Pune on 23rd  and 24th June 2012

Venues:

 

For the Walk-in at Bangalore: The Grand Krishna Rooms  , #77, Hosur Main Road , Near Ayyappa Temple, Madiwala , Bangalore-560068. Contact Numbers: 080-25525723/4/(0) 9246372722. Time: 10 AM - 3 PM


For the Walk-in at Pune: Hotel Quality Inn Centurion, Shivaji Nagar, Opposite Akashwani, Pune – 411005. Contact Numbers: 020-25510600/(0)9246372722. Time: 10 AM - 3 PM

 

 

Positions advertised for Bangalore Walk-in

 

OIL & GAS

 

Structural Designers (Job Code - SD): 3 to 10 years of experience in structural designing/modeling in the Oil and Gas domain (Either Offshore or Onshore) using tools like Microstation/Autocad/Prosteel/SP3D/Tribon/PDS/PDMS etc. Qualification: Diploma/B.Tech (Mechanical)

 

Structural Engineers (Job Code-STRUCTURES): 5 to 8 years of experience in design and analysis of steel structures and conversant with Staad Pro and ANSYS. Exposure to Marine and offshore structures will be an added advantage. Qualification: B.Tech (Civil) / MTech (Structures)

 

Pipe Support Engineers  (Job Code: PSE): 3 to 10 years of experience in pipe support and pipe support frame calculations and support positioning for non-critical lines in the Oil and Gas domain. Experience in 3-D modeling in PDMS/MDS software. Qualification: B.Tech (Mechanical)

 

Instrumentation Engineers  (Job Code- IEFG): 5 to 10 years of experience in preparation of data sheets, instrument index, loop diagram, logic diagram, field instruments, PLC control, F & G detections, ESD, fire/smoke  and alarm and fire - fighting systems. Qualification: B.Tech (Instrumentation & Control/Electrical/Electronics)

 

HEAVY EQUIPMENT AND TRANSPORTATION

 

Pro E Engineers (Job Code-PROE): 2 to 6 years of experience in modeling and detailing using part/sheet metal/assembly/surface/pro-cabling/pro-piping. Sound knowledge on Large assembly management, castings, forgings, plastics, welding, light/Heavy fabrications, engine installation/packaging, cable routing/wire harness, connector modeling, and ASME and GD&T is required. Wind-chill and PLM/PDM knowledge will be preferred. Qualification: Diploma (Minimum of 4 years' experience)/BE/B.Tech (Mechanical) with a minimum of 2 years' experience.

 

Catia V5 Engineers (Job Code-CATIA): 3 to 6 years of experience in various design activities like product design, detail design, engineering changes, design modifications and manufacturing drawings creation. Experience in Rail/ Automotive/Aerospace domain and PLM tools (ENOVIA, Teamcenter etc.) would be an added advantage. Qualification: Diploma (CITD/NTTF) / B.Tech (Mechanical)

 

CONSUMER PRODUCTS

Product Design Engineers (Job Code – PDE): 4 to 8 years of experience in Modeling and Detailing. Good understanding of BOM configurations with basic engineering. Exposure to Production Machinery, Consumer Products with Manufacturing environment. Experience in R&D with Product life cycle knowledge. Knowledge of ASME drafting standards and Practices.

Domain Knowledge: Product design, Plastics and Mold design  Software Tool: Unigraphics    Qualification: Diploma/B.Tech (Mechanical)

 

AEROSPACE

Structural Analysis Engineers / Leads (Job Code-SAE): 3 to 8 years of experience in Finite Element modeling and analysis of gas turbine engines or aircraft electrical systems using ANSYS / NASTRAN / Hypermesh. Qualification: B.Tech/M.Tech (Mechanical)

 

Aero Structures Analysis Engineers / Leads (Job Code: ASA): 4 to 10 years of experience in Analysis of Primary & Secondary (Fuselage, Wing, Empennage) structures. Working knowledge of Patran/Nastran, Abaqus, MathCAD, Excel VBA will be an added advantage. Qualification: BE/B.Tech (Mechanical)

 

 

Positions advertised for Pune Walk-in

 

OIL & GAS

 

Instrumentation Engineers  (Job Code- IEFG): 5 to 10 years of experience in preparation of data sheets, instrument index, loop diagram, logic diagram, field instruments, PLC control, F & G detections, ESD, fire/smoke  and alarm and fire - fighting systems. Qualification: B.Tech (Instrumentation & Control/Electrical/Electronics)

 

HEAVY EQUIPMENT AND TRANSPORTATION

 

Pro E Engineers (Job Code-PROE): 2 to 6 years of experience in modeling and detailing using part/sheet metal/assembly/surface/pro-cabling/pro-piping. Sound knowledge on Large assembly management, castings, forgings, plastics, welding, light/Heavy fabrications, engine installation/packaging, cable routing/wire harness, connector modeling, and ASME and GD&T is required. Wind-chill and PLM/PDM knowledge will be preferred. Qualification: Diploma (Minimum of 4 years' experience) /BE/B.Tech (Mechanical) with a minimum of 2 years' experience.

 

Catia V5 Engineers (Job Code-CATIA): 3 to 6 years of experience in various design activities like product design, detail design, engineering changes, design modifications and manufacturing drawings creation. Experience in Rail/ Automotive/Aerospace domain and PLM tools (ENOVIA, Teamcenter etc.) would be an added advantage. Qualification: Diploma (CITD/NTTF) / B.Tech (Mechanical)

 

CONSUMER PRODUCTS

Product Design Engineers (Job Code – PDE): 4 to 8 years of experience in Modeling and Detailing. Good understanding of BOM configurations with basic engineering. Exposure to Production Machinery, Consumer Products with Manufacturing environment. Experience in R&D with Product life cycle knowledge. Knowledge of ASME drafting standards and Practices.

Domain Knowledge: Product design, Plastics and Mold design  Software Tool: Unigraphics Qualification: Diploma/B.Tech (Mechanical)

 

AEROSPACE

Structural Analysis Engineers / Leads (Job Code-SAE): 3 to 8 years of experience in Finite Element modeling and analysis of gas turbine engines or aircraft electrical systems using ANSYS / NASTRAN / Hypermesh. Qualification: B.Tech/M.Tech (Mechanical)

 

 

Forward relevant resumes to HR directly mentioning "Job Code & Years of Experience" in the subject line to: Kiran.Chettigari@infotech-enterprises.com for Aerospace requirements and Vinod.Minnamreddy@infotech-enterprises.com for the remaining requirements and candidates have to attend the drive with their latest resume, academic and service credentials & latest pay slips. 


--


http://sakshi.com

Join YSR Congress IT Wing @ http://wesupportjagan.com
 

**Tags :** Jobs, Careers, Freshers, Openings, Walkin Interviews in, SAP, ABAP, BASIS, MM, SD, PM, PS, NW, Netweaver, Oracle, PL SQL, DBA, Apps, Java, J2ee, EJB, Struts, Testing, Automation / Manual, QTP, Load/WinRunner,Performance, Silk, Siebel, Embedded, Datawarehousing, Abinitio, Teradata, Informatica, Embedded, C, C++, VC++, Unix, Walkins, Hyderabad, Vizag, Chennai, Bangalore, Cochin, Trivendrum, Mumbai, Pune, Gurgaon, Delhi, Noida, Kolkata, Ahmedabad,TCS, Wipro, Infosys, Satyam, Tech Mahindra, HCL, Capgemini, Deloitte, GE, Infotech, Sonata, Polaris, IBM, Accenture, Bank of America, Birlasoft, L&T, Syntel, Broadridge, Zensar, CSC, Prokarma, Prithvi, Dupont,  Avantha, Cognizant(CTS), Hexaware..


No comments:

Post a Comment